Coroană de găurit, High Speed Plus Natural Stone, G1/2", dia. 26mm
The HIGH SPEED Plus natural stone diamond core bit with G1/2 inch threaded mount is suitable for wet drilling. With a maximum working length of 125 mm, the diamond core bit can drill holes with a diameter of 67 mm. Extremely easy-cutting drill bit with a long service life thanks to the high segments with a high diamond content. The overturned core bit body reduces wear on the core bit. Drilling at the edge or at the edge of the material without damaging it is possible thanks to the use of diamond rings.
Alegeți varianta:Coroană de găurit, High Speed Plus Natural Stone, G1/2", dia. 26mm
Numărul articolului:FF44826
Alegeți o altă variantă- Extremely fast cutting segments for hard materials Long service life despite soft diamond segments For drilling in material combinations (tiles & masonry) Overwound drill bit for exact rotation and therefore reduced wear Standard G1/2" connection, suitable for all ROTHENBERGER drill motors
- Inel de extracție a apei pentru RODIACUT 150 /131 DWS/170-C
- Inel de extracție a apei pentru RODIACUT 250 /202/270-C
- Pompă submersibilă de apă RODIAPUMP, transportor. 5.5m
- Befestigungs-Set Beton
- Pompă de vid, RODIA-VAC, 230 V, cu rezervor de siguranță de 10 litri
- Vas sub presiune, 10 litri, furtun de 2,5 metri compatibil cu cuplaj Gardena
- Furtun de conectare a apei pentru RODIADRILL/RODIACUT
Alegeți o variantă
Coroană de găurit, High Speed Plus Natural Stone, G1/2", dia. 26mm
FF44826
Coroană de găurit, High Speed Plus Natural Stone, G1/2", x 67mm
FF44867
High Speed Plus Naturstein, G1/2", D=67mm, NL=125mm
Coroană de găurit, High Speed Plus Natural Stone, G1/2", dia. 65mm
FF44865
High Speed Plus Naturstein, G1/2", D=65mm, NL=125mm
Coroană de găurit, piatră naturală High Speed Plus, G1/2", dia. 60mm
FF44860
High Speed Plus Naturstein, G1/2", D=60mm, NL=125mm
